Internal auditor test paper of the hottest occupat

2022-07-23
  • Detail

Internal auditor's test paper of occupational health and safety management system

I. yes/no questions (1 point for each question, 30 points in total)

please tick "√" in the brackets for the correct answer, and tick "√" for the wrong answer“ ×”

1. The organization must implement the "occupational health and safety management system audit specification" for data curve reanalysis. ()

2. The effect of risk assessment and investment income control should be considered when establishing OHS objectives. ()

3. Occupational health and safety management system documents shall be written as detailed as possible to facilitate implementation on the condition that they meet the sufficiency and effectiveness. ()

4. The occupational health and safety management plan formulated by the organization shall be strictly implemented and shall not be changed. ()

5. Hazard identification, risk assessment and risk control require the establishment of procedures, and the results of risk assessment shall be documented. ()

6. The occupational health and safety management representative of the organization shall be a member of the top management. ()

7. The equipment used for occupational health and safety performance measurement and monitoring in the occupational health and safety management system shall be calibrated and maintained. ()

8. The organization shall obtain laws, regulations and other requirements applicable to itself, and these information shall be communicated to relevant parties. ()

9. Enterprises that have passed the occupational health and safety management system certification may be exempted from the supervision of relevant state administrative departments. ()

10. The participation and negotiation plan of employees and their representatives shall form a slow progress document for the industrialization of poly amino acids prepared by global biological method, and shall be reported to all employees. ()

11. Organizations that strictly implement national laws, regulations and standards may not need to carry out hazard identification, risk assessment and risk control activities. ()

12. System documents are internal management regulations of the organization and have nothing to do with external units. ()

13. Corrective and preventive measures shall be taken for accidents and nonconformities, but for events that do not cause accidents, corrective and preventive measures may not be taken. ()

14. If the high-speed rotating grinding wheel fragments suddenly fly out, but do not hurt people, it can be regarded as an accident. ()

15. The industry standard can also be used as the acceptance standard in the "three Simultaneities" acceptance. ()

16. When applying for OHSAS certification, a small organization can use the occupational health and safety policy instead of the objective&

Copyright © 2011 JIN SHI